Our extensive experience in injection projects in cleanroom joined our Cleanroom facility in compliance with ISO 7 standards – Class C, makes us a supplier capable of generating high added value in sectors such as medical or pharmacist.
Cleanroom injection
Have a cleanroom ISO 7 - Class C, for manufacture and handling of plastic parts, with an annual capacity of 8,000 hours and two injection machines.
Controls and certifications for injection in cleanroom
The plastic injection in cleanroom, requires the highest quality standards and for this we have the ISO 9001 Tüv Rheinland certification that guarantees that the injection of plastic pieces in a cleanroom is carried out under the highest quality standards.
Air Control
The air that enters in the cleanroom is sterile and has been filtered to remove suspended particles and microorganisms. It is completely renewed several times an hour to avoid dust.
Pressure control
Cleanroom is maintained at a level slightly higher than the outside pressure, so that when the doors open and the air exits, air cannot enter contaminated with microorganisms from outside.
Control Operators
Operators that work in the cleanroom must wear special suits for not carrying pollutants or generate dust particles.
Cleanroom design
The walls of the cleanroom are covered with vinyl and corners are rounded to avoid accumulation of dirt.
Airlock
Cleanroom airlocks keeps pressure differences between rooms and isolate them from the outside.
Filtering systems
In the cleanroom, high efficiency HEPA filters whose fibers are composed of glass fiber with diameters of 2.0 micrometers to retain particles.